• Home
  • About
  • Standard Pilots
    • Standard Adsorption Pilot Plants
    • Standard Dissolved Air Flotation Pilot Plants
    • Standard Granular Media Filtration Pilot Plants
    • Standard Coagulation, Flocculation, and Sedimentation Pilot Plants
    • Standard Ozonation Pilot Plants
    • Standard Pilot Module Enclosure
  • Lease Pilots
  • Custom Pilots
    • Biological Filtration Pilot Plants
    • Custom Flocculation, Sedimentation, and Coagulation Pilot Plants
    • Granular Media Filtration Pilot Plants
    • Ozonation Pilot Plants
    • Reverse Osmosis (RO) Pilot Plants
    • Ultra Filtration Pilot Plants
    • Custom Electrolytic Cell Treatment Pilot Plants
  • Careers
  • Resources
  • Contact

801-487-9255 techsupport@intuitech.com

sales@intuitech.com
Intuitech
  • Home
  • About
  • Standard Pilots
    • Standard Adsorption Pilot Plants
    • Standard Dissolved Air Flotation Pilot Plants
    • Standard Granular Media Filtration Pilot Plants
    • Standard Coagulation, Flocculation, and Sedimentation Pilot Plants
    • Standard Ozonation Pilot Plants
    • Standard Pilot Module Enclosure
  • Lease Pilots
  • Custom Pilots
    • Biological Filtration Pilot Plants
    • Custom Flocculation, Sedimentation, and Coagulation Pilot Plants
    • Granular Media Filtration Pilot Plants
    • Ozonation Pilot Plants
    • Reverse Osmosis (RO) Pilot Plants
    • Ultra Filtration Pilot Plants
    • Custom Electrolytic Cell Treatment Pilot Plants
  • Careers
  • Resources
  • Contact

Back to Lease Equipment

Ozonation Pilot Module Z500

Module consists of a two feed pumps and two contact chambers. Ozone can be applied at the inlet of the chamber at the midpoint of the chamber. Unit can be run in series or in parallel allowing for the ability to side by side ozonation studies. Both trains are fed from a common ozone control panel and both trains are connected to an ozone destruct unit. Feed flow is maintained through automatic PID flow control. Depending on the contactor configuration, contact chambers have either twenty-five or fifty volumetrically-spaced ports for sampling dissolved ozone. The ozone generator is air-cooled with an integral oxygen concentrator for creating ozone from ambient air, and shuts down automatically if a leak is detected. Ozone delivery is flow paced with direct entry of ozone dosage or ozone gas concentration. Ozone is delivered through a fine bubble diffuser. Ozone gas sensor zero calibration can be performed manually, or automatically based on runtime without interruption of ozone delivery to the contactors. Other features include automatic data logging of key parameters, secure remote monitoring and control over the internet, and email alarm notification.

Specifications

Module Z500
Configuration Z11-11PC-1GC-2OS-1TM-1DO-0PH-2CF-SAI-RPS
Number of Trains 1
Contactor Configuration 6 feet high, 130 gallons (1.8 m, 492 L)
Feed Pump Capacity 2.0…10 gpm (7.6…37.9 lpm)
Maximum Ozone Delivery 80 (mg/L)(gpm) (303 (mg/L)(L/min))
Ozone Concentration 8…13 %W (117…194 g/Nm3)
Trasfer Method Fine Bubble Diffuser
Dissolved Ozone Transmitters 1
Chemical Feed Systems 2
Chemical Feed Rate 0.02…16.5 mL/min
Chemical Tank Volume 4 gallon (15.1 L)
Power 120 V AC, 1 phase, 60 Hz, 20 A or
240 V AC, 1 phase, 60 Hz, 10 A
Options Shipping tarp
Dimensions 90” (2.3 m) L x 48” (1.2 m) W x 97” (2.5 m) H
Dry Weight 1,950 lbs (884.5 kg)
Operating Weight 3,600 lbs (1,633 kg)
Monitored Parameters Oxygen Concentration, Ozone Feed Gas Concentration, Water Flow Rate, Ozone Transfer Efficiency, Chemical Feed Rate, and Chemical Tank Level for each feed system, Spare Analog Signals (3 qty.)

© 2025 Intuitech, Inc. All Rights Reserved Legal