• Home
  • About
  • Standard Pilots
    • Standard Granular Media Filtration Pilot Plants
    • Standard Coagulation, Flocculation, and Sedimentation Pilot Plants
    • Standard Ozonation Pilot Plants
    • Standard Pilot Module Enclosure
  • Lease Pilots
  • Custom Pilots
    • Biological Filtration Pilot Plants
    • Custom Flocculation, Sedimentation, and Coagulation Pilot Plants
    • Granular Media Filtration Pilot Plants
    • Ozonation Pilot Plants
    • Reverse Osmosis (RO) Pilot Plants
    • Ultra Filtration Pilot Plants
    • Custom Electrolytic Cell Treatment Pilot Plants
  • Resources
  • Careers
  • Contact

801-487-9255 techsupport@intuitech.com

sales@intuitech.com
Intuitech
  • Home
  • About
  • Standard Pilots
    • Standard Granular Media Filtration Pilot Plants
    • Standard Coagulation, Flocculation, and Sedimentation Pilot Plants
    • Standard Ozonation Pilot Plants
    • Standard Pilot Module Enclosure
  • Lease Pilots
  • Custom Pilots
    • Biological Filtration Pilot Plants
    • Custom Flocculation, Sedimentation, and Coagulation Pilot Plants
    • Granular Media Filtration Pilot Plants
    • Ozonation Pilot Plants
    • Reverse Osmosis (RO) Pilot Plants
    • Ultra Filtration Pilot Plants
    • Custom Electrolytic Cell Treatment Pilot Plants
  • Resources
  • Careers
  • Contact

Back to Lease Equipment

Granular Media Filtration Pilot Module F1000

Module consists of four constant rate filters with individual feed pumps, and four chemical pumps. Module can be fed from two different raw water supplies, operating 1, 2, or 3 columns from the second supply. Each filter operates using automatic PID flow control. The module can be operated in parallel or series configuration. In series configuration, 2-stage, 3-stage, and 4-stage filtration is possible. The air scour and backwash systems are shared by all filters, and also utilize automatic PID flow control. Chemical feed pumps are flow paced with direct entry of chemical dosage. Each chemical pump can be selectively paced to any of the filter feed flows, the combined filter feed flow, or the backwash flow. An improved backwash process is included, providing superior performance when operating biological filtration processes. Backwashing is initiated manually by an operator in the manual mode, or on runtime, run volume, headloss, or effluent turbidity in the automatic mode. Only one filter may be backwashed at a time. Other features include superior on-board process diagnostics turbidimeters, automatic data logging of key parameters, secure remote monitoring and control over the internet, and email alarm notification.

Specifications

Maximum Total Flow Rate 12.0 gpm (45.5 L/min)
Filters 4 @ 6 inch diameter (150 mm) x 112 inch height (2.84 m)
Maximum Media Depth 72 inch (183 cm)
Filtration Rate 2.55…15.7 gpm/ft² (6.23…38.4 m/h)
Backwash Rate 5.1…51.0 gpm/ ft² (12.4…124.7 m/h)
Backwash Tank Volume 150 gal (568 L)
Air Scour Rate 2.6…9.2 scfm/ft² (46.6…164.9 m/h)
Dimensions 146” (3.71 m) L x 50” (1.27 m) W x 126” (3.20 m) H
Crated Dimensions 146” (3.71 m) L x 50” (1.27 m) W x 91” (2.31 m) H
Crated Weight 2,900 lbs. (1,315 kg)
Power 1 phase, 12.0 A @ 120 VAC or 1 phase, 6.0 A @ 240 VAC

Instrumentation

Flow Rate (each filter)*
Headloss (each filter)*
Effluent Turbidity (each filter)*
Filter Column Level (each filter)*
Air Scour Flow*
Backwash Flow*
Backwash Tank Level*

*Data Logged

© 2023 Intuitech, Inc. All Rights Reserved Legal